• Home
  • About us
  • Products
  • Technology
  • Service
  • News
6V 6KG metal tooth 360 degree magnetic encoding single axis serial servo STS3045M
STS3045M是6V 6KG串口总线智能舵机,采用全铝合金外壳、空心杯电机、金属齿牙箱、飞特自主研发的TTL控制板,12位高精度磁编码传感器。堵转扭矩6kg.cm,能实现360度任意角度可控,多圈连续转,步进等工作模式,可实现一键设定中位功能,加速度缓启动与缓停止,能反馈位置、速度、电压、温度、负载参数,从而实现过载保护。适合应用在工业设备、机器人等小扭力传动应用场景。
STS3045M is 6V 6kg serial bus smart servo,aluminum alloy case is used、corless motor、metal gearbox 、Feetech self researched and developed TTL control board,12 bit high precision magnetic coding sensor. The stall torque is 6kg.cm,can achieve 0-360 degrees any angle controllable,multi-turn continuous operation mode,it can realize the function of setting the middle point with one key,acceleration slow start and slow stop,can feedback position、speed、voltage、current、temperature、load parameters,thus, overload and over-current protection can be realized. It is suitable for application in industrial equipment, robot and Small torque drive application scenarios.

型 号 Model:

STS3045M

产品名称 Product Name:

6V 6KG全金属360度磁编码单轴舵机/6v 6kg 360 degree steering gear

存储温度 Storage Temperature Range -30℃~80℃
运行温度 Operating Temperature Range: -20℃~60℃

尺寸 Size:

A:36mm B:15mm C:29.2mm

重量 Weight:

34.8± 1g

齿轮类型 Gear type: Metal Gear
机构极限角度 Limit angle:

NO limit

轴承 Bearing: 滚珠轴承Ball bearings
出力轴 Horn gear spline: 25T/OD5.9mm
摆臂 Horn type: Plastic,POM
外壳 Case: Aluminium
舵机线 Connector wire: 15CM
马达 Motor: Coreless motor

工作电压Operating Voltage Range:

4.8-7.4V

空载速度 No load speed:

0.133sec/60°@6V

空载电流 Runnig current(at no load) : 120 mA@6V

堵转扭矩 Peak stall torque:

6kg.cm@6V

额定扭矩 Rated torque:

2kg.cm@6V

堵转电流 Stall current: 1.4A@6V
控制信号 Command signal: Digital Packet
协议类型 Protocol Type: Half Duplex Asynchronous Serial Communication
ID范围 ID range: 0-253
通读速率 Communication Speed: 38400bps ~ 1 Mbps

旋转角度 Running degree:

360° (when 0~4096)

反馈 Feedback:

Load(负载), Position(位 置),Speed(工作速度), Input Voltage(输入压),
Temperature(工 作温度)

详细规格书下载Download detailed specifications:

STS3045M-串型规格书-20201207.pdf

外形图 The Drawings:

image.png

Copyright © 2020 All rights reserved:Shenzhen FEETECH RC Model CO.,Ltd. Address:2 Floor, No. 60, Puxia Road, Liu yue, Henggang Town, Longgang, Shenzhen, China Tel:86 755 89335266